The cost of a single tyre from a premium manufacturer can be as high as £250 and beyond. So, once you have bought a new pair of tyres in Coventry, it’s only prudent to ensure that they last as long as possible.
How to maintain your car’s tyres?
Let’s look at some of the ways to ensure a tyre’s longevity.
Maintain Proper wheel alignment
Correct wheel alignment is directly related to a tyre’s longevity. When the wheels are out of alignment, the tyres don’t rotate in a straight path. As a result, they tend to drag across the road which induces excessive tread wear.
Types of tread erosion due to wheel misalignment
Different types of tread wear result from different kinds of wheel misalignment.
Feather wear results in a peculiar kind of erosion pattern. On a tyre that has been affected by this pattern of erosion, it’s smooth in one direction, and sharp on the other. It’s usually caused by poor toe alignment.
It is characterised by excess tread wear either on the inner side or the outer side of the tread than the centre. An excess positive or negative camber results in this type of tread wear.
Have you been noticing that one side of a series of tread blocks wears down more in the circumferential direction?
It’s a result of misalignment of the toe angle. When viewed from the side, this pattern of tread erosion looks like a saw.
So, by maintaining proper alignment of car tyres in Coventry, you ensure that these types of tread wear are avoided and tyres last longer.
Check inflation pressure regularly
To increase a tyre’s longevity, you must maintain proper tyre inflation pressure. Abiding by the manufacturer recommended tyre pressure is the best option here. Overinflating the tyres causes excessive erosion in its centre. On the other hand, underinflated tyres erode more near the shoulders.
Moreover, when you are driving with underinflated tyres, they are more prone to punctures. It’s because under-inflation causes the sidewalls to flex a lot, making it easier for debris to tear into the body.
Now, tyre pressure can fluctuate with changing temperature. For instance, during winter, tyre pressure drops rapidly due to the low ambient temperature. Thus, maintaining the right tyre pressure is essential for the longevity of your car tyres in Coventry.
Tyre rotation is a procedure where the tyre’s positions are interchanged. Doing this evens out all types of uneven tread wear, thereby increasing the usability of your car’s tyres in Coventry. Experts agree that in general, you should opt for a tyre rotation after every 6,000 to 8,000 miles. There are different rules for tyre rotation for different types of vehicle and tyres. For example, tyres with asymmetrical tread pattern need different patterns of rotation than directional tyres.
Overloading your car causes the tyres to wear faster. A tyre’s load index, mentioned in its code, indicates the maximum weight it can carry safely. Exceeding this weight will cause excess tread erosion and wear.
Buying new car tyres after the old set’s tread has reduced below 3mm is essential. Visit Central Point MOT for the best car tyres in Coventry. They also offer tyre rotation and wheel alignment.
For more information please visit here:- MOT Coventry