The first tyres were probably made of wood, despite Fred Flintstone’s widely popular pre-historic granite model. The automobile industry has come a long way since then. A typical 21st century tyre is developed after spending millions of pounds and thousands of man-hours in R&D.
However, it is your responsibility as a car owner to make sure that the tyres you buy are best suited for your vehicle and you. There are hundreds of models available in the market today, with each company screaming about their superiority of over the other.
It might get confusing to choose one. However, keeping the following points in mind will help process you get the best set of tyres for your car.
No matter what anyone tells you, size does matter; at least, when it comes to tyres. Every model of car has a particular size that it is compatible with. Fitting an 18-inch tyre on a 16-inch compatible vehicle isn’t the most practical of choices.
You may find the recommended tyre size on your OE tyres’ sidewalls. It is also mentioned in the owner’s manual. Look out for an alphanumeric value like 215/55 R18. Buy tyres for your car which are an exact match to the manufacturer recommendations.
It is particularly essential when you are buying part-worn Tyres in Blackburn. New tyres have a standard tread depth of 8 mm. It is quite evident that part-worn tyres won’t have as much. However, if you are buying a set of part-worns, make sure that the tread depth is not less than 5 mm.
Tread depth is essential for maintaining traction. If the tread depth is any lower than 3 mm, your braking and handling performances will be visibly affected.
You must choose the tyre profile based on your expectations from your tyres. If you want a fuel-efficient ride, go for tyres that have a slim profile. On the other hand, a wide tyre will increase the contact patch, giving you more control over the steering of your vehicle other than an obvious escalation of the performance.
There are advantages and disadvantages to both types of tyres. Slimmer tyres generally have a greater braking distance and low steering precision, while wider tyres increase the risk of hydroplaning considerably. Weigh the pros and cons carefully before making up your mind.
Treated rubber is the primary ingredient of manufacturing a tyre. Rubber is susceptible to changes in temperature. It, therefore, follows reason that a tyre will perform differently in different seasons.
Manufacturers have come up with season-specific tyres to address this issue. When you visit tyre retailers like Nils Tyre Service, you’ll find that there are summer, all-season and winter tyres in their inventory. Opt for summer or all-season tyres if you are going to drive at temperatures above 7°C. You should choose Winter Tyres in Blackburn if the temperature is any lower than that.
Run-flat tyres are a relatively recent innovation that lets you drive for a few additional miles even with a leak. If your budget allows it, run-flats are a significant upgrade that’ll definitely enhance your ride quality.
Once you have carefully considered all the points mentioned above, purchasing the perfect set of tyres shouldn’t be difficult.