Facts about Wheel Alignment You Must Know before Heading for a Service

Wheel alignment is one of the most crucial maintenance tasks to perform for your car’s optimal output. Your car wheel’s alignment angles affect fuel efficiency, tyre wear rate, performance, manoeuvrability and handling. Moreover, wheel alignment has a significant impact on steering response as well.

Wheels become misaligned due to adverse road conditions and improper driving habits. For instance, hitting a curb puts excess strain on the suspension which may lead to wheel misalignment. The front wheels of a car are more susceptible to go out of alignment. The process of aligning a vehicle’s wheels varies between car models. That’s why you must seek professional help for Wheel Alignment Malton.

Before you visit a car garage for your next wheel alignment service, knowing a few critical facts will enable you to seek the best service.

Facts on Wheel Alignment that You Must Know about

Pre-alignment inspection

A thorough pre-alignment examination is essential so that you don’t have to revisit the garage with an unaddressed issue. If you have been driving for a while with misaligned wheels, then chances are your car’s suspension parts have been adversely affected. Driving with wheel misalignment for a long time will cause the dampers and struts to sustain extra stress. As a result, they wear out faster and need replacement sooner.

Different alignment angles

Having elementary knowledge will help you seek the right service. There are 3 alignment parameters based on which a car’s wheels are aligned. Let’s take a look at them.

  • Caster – Caster of a vehicle is the angle in reference to which the front suspension is positioned with respect to the vertical axis. It is measured with alignment equipment. A slight positive caster imparts higher steering stability.

  • Camber – Unlike castor, camber is an angle that can be identified merely by viewing a car’s wheels from there front. It’s the angle by which the top of a car’s wheel tilts outwards or inwards. Negative camber causes a tyre’s head to lean away from the vehicle, while positive camber causes tyre wheels to tilt inwards towards the car.

Generally, in passenger cars, a slight negative camber is preferred. However, many sports cars maintain a strong negative camber for superior handling characteristics. Setting the camber to an extreme negative angle will cause excessive tyre tread erosion.

  • Toe – The angle which a car’s tyres tilt inwards or outwards when viewed from the side is the toe angle. Out of all three alignments, the toe is the easiest to adjust. Having too much toe in or out cause vehicle instability. You should ask the technician to adjust the toe angles as close to zero as possible.

Any faults with alignment start to show as accelerated and uneven tyre erosion. Thus, if your car’s wheels have been out of alignment for a long time, then you must buy new Tyres in Malton too.

Suspension issues

Over time suspension parts wear out, and the springs begin to sag. As a result, your car’s ride height changes. Lower ride height automatically leads to negative camber. So, be sure to inspect your car’s ride height periodically.

Keeping the above facts in mind will help you to seek the best wheel alignment service. Visit Terry Elsey Tyres for precise wheel alignment. They also sell a wide range of car tyres from top brands such as Michelin and Bridgestone.


Leave a Reply

Your email address will not be published.