Five Most Important Checks Before An MOT Test

When you are driving on the road, keeping yourself and others safe is your main priority. From obeying traffic rules to insuring your car, every step counts. That is why checking your vehicle condition with the help of the MOT test is also necessary.

The Ministry Of Transport test, often abbreviated as the MOT test, is an examination every car, motorcycle, and SUV has to take. In the UK, the legal requirement is applicable once the vehicle turns three. That age is calculated from the registration date. While most drivers understand the importance of this test and take it in time, many do not pass it on the first attempt.

If you want to avoid MOT failure, you have to make sure everything is in order before you go for the test. So, to do this, you will have to keep a checklist of some quick tests. Performing these ahead of time will diagnose your vehicle, checking whether it has these faults or not. If it does not, then you are good to go. But if any of these defects are detected, you have to get them fixed. Given below is a list of five such MOT Boston checks you must perform.

  1. The Condition Of The Licence Plate:

The licence number plate of your vehicle is its identity. That means it has to be readable to everyone at all times. If during your MOT test, the number plate is dirty or unclear, you risk a failure. So, make sure you wash it beforehand. Also, the font and spacing of the alphanumeric characters on the plate should be per the rules.

  1. The State Of The Lights And Indicators:

External electrical components such as lights, indicators, et cetera are highly prone to damage. One broken light bulb can cause you to fail the test. So, it is crucial that you carefully inspect all the head and tail lights, number plate bulbs, and hazard lights. Press the indicator buttons to see if the respective lights are functioning correctly. If you find any bulb is broken or shot, replace it with a new one immediately. That is not only vital for passing the MOT test but also for your safety.

  1. The Health Of Your Tyres:

Tyres are the only part of the vehicle that remains in direct and constant contact with the road surface. That makes them prone to wear and tear. If such signs of damage are found during the test, you are bound to fail it. So, make sure you check your tyres properly beforehand. Measure the tread depth with a tread depth gauge or a 20 p coin. If the value is below the legal limit of 1.6 millimetres, you are in trouble. Replace your tyres right away because this is quite dangerous. Many tyres have tread wear indicators that show through when the tread wears down. Keep an eye out for those as well. Also, check for uneven erosion of the tyres. If found, rotate your tyres in an appropriate pattern to prevent it from happening further.

  1. The Condition Of The Windshield And Wipers:

A shattered or scratched up windscreen can obstruct the driver’s view. So, keeping it clean and unchipped is essential. In general, a crack more than 10 millimetres in the driver’s part of the windshield warrants an MOT failure. The same consequences follow if a fault of more than 40 millimetres is found in the remaining space. Aside from the screen, the state of the wipers is also taken into account. If they malfunction or fail to clear the front and rear screens, your car will fail the test. So, make sure you check both of these two things before sending your vehicle to the testing centre.

  1. The Amount And State Of The Fuel And Engine Oil:

The condition of the fuel and engine oil in your vehicle determines its performance. If any of these is dirty or degraded from heat, it is most likely not doing its job right. So, get a service to check. Also, make sure you top both the fuel and oil up regularly along with the brake and washer fluids.

Conclusion:

The MOT test determines your vehicle’s roadworthiness. If you fail, you cannot use your car or SUV until you fix the problem and get a retest. So, if you want to avoid this trouble during your MOT Boston test, perform the checks mentioned above. Doing so will reduce the probability of failure by a long shot. So, you will pass the test with flying colours.

Leave a Reply

Your email address will not be published. Required fields are marked *