Five Tyre Maintenance Tips

Proper maintenance of your tyres is just as critical as maintaining your car. Not having a regular vehicle maintenance schedule can lead to a range of problems including premature failure and excessive wear. Listed below are some tips to get the best out of your tyres.

Inspection

Sometimes, doing a visual check at regular intervals can help you identify and prevent tyre failure. Check for any irregularities like cuts, cracks, and cracks on the tyre surface and sidewall. Make sure to check the inner surface as well. Cracks formed due to glass, stones, or other debris can potentially lead to tyre failure over a period, and these should be removed at the earliest to prevent the widening of the cracks. In case of a nail being embedded into one of your Michelin Tyres Birmingham, do not try to pull it out. Instead, take it to the nearest car mechanic for repair.

Treadwear check

Often, there is a treadwear indicator marked using a small arrow on the outer wall of the tyre. The wear indicator can be seen if you follow along with this arrow. The tyre is considered ready for replacement if the outermost tyre layer touches this indicator. It the depth is less than 2mm, then the tyre should be replaced at the earliest.

Tyre Pressure Check

Uneven tyre surface wear can result from improper inflation. So it is recommended that you get all the tyres including the spare checked every two weeks. Improper inflation can also lead the tyres to burst on highways. The tyre pressure recommendation can be found on the driver’s side door and in the owner’s manual.

Tyres can suffer from overinflection as well as underinflation. When overinflated, the centre of the tyres will wear faster, and also will be at a greater failure risk. The amount of tread touching the road reduces when overinflated thereby increasing the wear in the tread centre.

What is Recommended Tyre Pressure?

Usually, you can find this information on the driver’s side door or in the owner’s manual. At times, this information is also present on the inside flap of the fuel tank. The pressure should also be appropriately adjusted if you are carrying a heavy load or have a vehicle full of passengers.

If you notice that you need to pump air very frequently, this could be the result of a puncture or due to some issue with the valve or rim. If this happens take your car to the local garage. In a nutshell, you should keep a track of your tyre pressure often and check with your local tyre shop often to inflate it back to the recommended pressure.

Regular Tyre Rotation

To make sure that all your tyres wear out evenly and have the longest possible life, tyre rotation is the way to go. When to do tyre rotation depends on the vehicle type – rear-wheel drive, four-wheel drive, or front-wheel drive. It is recommended to have your Tyres Online Birmingham rotated every 10000 miles.

Wheel Balancing and Alignment

When you drive, if you are noticing that the car is pulling to a side or having uneven wear, or if there are steering wheel vibrations, having your wheel alignment done could fix those problems. Wheel alignment can be understood as the calibration of tie-rod and suspension settings. Steering vibrations could also happen if there is an unbalanced tyre. To check if there is an unbalance, the wheel is rotated at a high speed. Weights can be added along the rim to correct this. It is advisable to balance your tyres once every 10000 miles.

Leave a Reply

Your email address will not be published. Required fields are marked *