How the Condition of Wheels affects Your Car’s Tyres

Fitting your car with the right kind of tyre will help you get the best out of your car. But that is just one part of your vehicle’s maintenance. A wheel on which the tyre fits needs some maintenance as well.

Your car’s wheels and tyres can be unbalanced or misaligned. Both are different kind of problems, but show similar problems.

What does it mean to have a balanced wheel?

A balanced wheel is, in other words, a balanced tyre. When the mass of the entire tyre distributes evenly across the whole circumference of wheel, the wheel assembly stays in balance. Casting and forging process is used to make the metallic parts of the wheel assembly. Because of this, there are fewer chances of uneven mass distribution in these parts.

Uneven mass distribution on the tyre body is a primary cause of wheel imbalance. While the tyre rotates, the denser parts on your car’s wheels will generate extra forces that will induce vibrations and shocks on the entire wheel assembly.

Signs of wheel imbalance

  • Vibration on the chassis of your car that spreads into the cabin.
  • Steering wheel vibration.
  • A sudden dip in fuel economy can be a sign of the tyres being out of balance.
  • Excessive tread wear is also a sign of wheels being out of balance. Erosion that appears in the form of scalloped or cupped pattern is one of the most common indicators.

When you notice the signs of wheel imbalance, head over to our auto garage to avail a wheel balancing in Birmingham.

Wheel imbalance inflicts the most damage on your tyres. The solution to this is to swap out the old tyres with new ones. Or, you can also opt for a re-treading service. While switching to New tyres Birmingham, always keep the tyre specifications in mind. Fitting your car with tyres of the appropriate specification will prevent any excess tread erosion.

Apart from wheel imbalance, wheel misalignment is also an issue that many drivers often face.

The 3 basic parameters of wheel alignment are toe, camber and caster. Toe and camber are the most common issues with alignment.

What is Camber?

Camber is the degree by which the wheels tilt inward or outwards. Measurement of camber is taken from the vertical axis of your vehicle. Too much inward tilt is negative camber; too much outward tilt is positive camber.

Any excess camber will result in uneven tread wear. This tread wear is due to camber misalignment, also called camber wear. A slanted profile of the tyre tread, with less tread depth on one side than on the other, is a sign of camber wear.

What is Toe?

Toe alignment is the degree by which your tyres’ inner edge turns towards or away from each other. Improper toe alignment results in a distinct kind of tread erosion. Also known as feathering, this is a specific type of tyre erosion which happens due to improper toe alignment.

Tips to prevent wheel misalignment

  • Maintain optimum suspension conditions.
  • Drive cautiously and avoid hitting sharp curbs or jerks, especially at high speeds.
  • Avail an alignment service every time you rotate your tyre set.
  • Avail a wheel balancing after every 3000 to 6000 miles. Properly balanced wheels prevent misalignment.

In case you are looking for wheel alignment Birmingham, visit Flaxley Tyres. It also stores a variety of tyres from all the top-selling brands off the world.

Leave a Reply

Your email address will not be published. Required fields are marked *