In the UK, if you want a hassle-free driving experience, it’s mandatory to take the MOT test. As per Government rules, an MOT test is compulsory for every vehicle over three years to pass MOT check. This ensures the vehicle’s roadworthiness. It is an annual test conducted by the ministry of transport to check if your car’s in proper driving condition or not.
Every motorist needs to follow a few essential steps to pass this test. You can turn up at reputed garages like West Road Customs for an MOT in Peterhead. The garage also offers engine diagnostics and vehicle repairs among other services.
MOT test failures are mostly caused by issues that are easily avoidable. So, here’s a guide to prepare your car before you show up for an MOT check.
Fix issues with Steering and Suspension
If you don’t want your vehicle to be deemed as un-roadworthy, get any problem with your car’s steering and suspension fixed beforehand. A technician first checks these parts during the test. So, if there’s a problem regarding them, your vehicle will fail at the very first step of the test.
Check Wheels and Tyres’ Condition
Proper functioning of vehicle’s wheels is critical for passing the MOT. Therefore, if there’s an issue with them, fix that in well in advance. It’s also recommended to perform wheel alignment and wheel balancing check from a local garage before you turn up at the test centre.
Check if the tyres are in perfect shape. Make sure they’re properly inflated. The new rules have brought air pressure inflation under the purview of MOT.
Pay attention to the tyre’s sidewalls for any cracks and bulges. Also, check tyre tread depth. See if it complies with the legal minimum limit of 1.6mm. However, this requires professional assistance. Thus, get the tyres inspected before you book an MOT Peterhead.
Solve Braking Problem
When it comes to safe driving, brakes are a crucial part. During an MOT test, braking is checked thoroughly. Thus, double-check whether they are performing adequately.
Is the Car Battery Good?
As a battery is an integral component of your vehicle, it will be minutely checked by the examiner in the test. If they find any corrosion in cables or leakage of fluid, you’ll not be allowed to drive your car.
Inspect the Vehicle’s Exterior
Remember the saying, “The first impression’s the best impression“. Same goes for your car as well. If a technician at the MOT centre sees any deformity in a vehicle’s physical structure, it’s guaranteed to fail this test.
Emission System Undergoes Intense Scrutiny
According to a report, 30% of faults are emission issues. So if your car emission exceeds the legal limit, your vehicle will straightway be marked unfit. Apart from that, they also inspect a vehicle’s exhaust system. Any little issues like a loose exhaust pipe will be considered as a fault. So, run a full vehicle diagnosis beforehand at an authorised service centre.
Follow these guidelines, and you’ll be ready to appear for an MOT test at any garage.