Tyre Maintenance Guide: Identify, Fix & Prevent Tyre Cupping

Many times, defects and defaults in car components lead to a phenomenon called tyre cupping. The most remarkable sign that points towards cupping of your car Tyres in Henlow is worn out tread in a scalloped shape. You may also notice a screeching sound while riding.

Cupped tyres pose a remarkable safety risk as they weaken and may not be able to carry the vehicle’s or passenger’s load. They need to be fixed at the earliest. Hence, the first step is to identify cupped tyres.

Check Out for These Signs –

  • If the vehicle wobbles or vibrates while you hit a roadblock, chances are more than one tyres are cupping.

  • While taking a regular turn, your vehicle may lean too much on one side. If you notice this, it means the tyres have worn out in a cupped shape. Thus, it does not lend required balance to your car.

  • Let your vehicle slow down on its own without applying brakes. If it leans on one side, it is again a pointer of tyre cupping.

  • You can also identify cupped tyres by inspecting them with your hand. At first, it may not be visible, but if you find the surface to be wavy, it means the tyre has cupped.

Tyre cupping may be a result of underlying issues like –

  • Wheel misalignment

  • Shock absorbers that are loose or worn out

  • Suspension components that have suffered damage or are not in place

In the long term, these factors lead to more severe issues that will lower your car’s overall performance.

Tips to Fix Cupped Tyres

Once you are done with the identification, the next step is to go for an immediate fixing of cupped tyres to avoid any further damage. If your car tyres have degraded beyond usability, the only way is to go for a replacement. Also, you need to take up other necessary measures.

  • Rotate the tyres

If the tyre tread has not worn out significantly, you should take up tyre rotation. Thus, the uneven tread will smoothen out.

  • Get the wheels rebalanced

You can also take the vehicle for wheel rebalancing. It will bring back weight distribution, thus making all four tyres more efficient.

  • Replace damaged suspension components

Since suspension components are a probable cause of tyre cupping, it’s better that you get them checked. If they are damaged and cannot be repaired, go forward with their replacement.

Now, over to the prevention of cupped tyres!

Tips to Prevent Tyres from Cupping

  • Go for tyre balancing after every 3,000 to 6,000 miles of the run. It will maintain weight distribution of Tyres Biggleswade, thus giving them a longer life.

  • Carry our rotation of tyres after 5,000 to 8,000 miles of the run. It will ensure tyres do not wear out unevenly.

  • Take your vehicle for a suspension and wheel alignment check at least once in a year.

  • Perform a check on tyre pressure frequently, if possible once in every month.

Identify tyre cupping and take your vehicle for these checks and repairs at your nearby garage. Going to garages like Sandy Auto Centre will ensure you get a thorough diagnosis, repair and replacement of car tyres and components.

Leave a Reply

Your email address will not be published. Required fields are marked *