What Is The Correct Approach To Safe Braking System

Travelling in private or public transport has become a way of life. We travel for work, leisure, medical emergencies, and many such other events to get to our destination. We sometimes might travel alone, or can travel with our loved ones at different times. Have you ever imagined the consequence of a journey if the safety systems of the car are not checked properly? What could be the outcome of such negligence by the owner of the vehicle? It could be grave enough for us to even imagine. Safety precautions are thus the means of life which one should always be in check of.

Braking is one of the most critical safety features of any vehicle, which requires routine maintenance. This safety component, however, provides clear indications of issues being faced by it in the car. To avoid any kind of damage, it is vital to check these warning signs which might be indicative of some problem with the brakes.

Signs of a Brake Problem

1. Squeaking or Grinding Noise

You may sometimes hear a high-pitched sound that stops when the brakes are applied. This noise is indicative of the brake pads been worn out. The grinding noise could be heard due to the lack of lubrication in the braking systems of the vehicles.

2. Brake Lights On

If the brake indicator on the dashboard lights up, it signifies that the car is due for inspection.

3. Soft Brake Pedal

Any difference noticed in the resistance of the brake pedal is a clear signal of immediate service.

4. Odd Burning Smell While Driving

This is a sign of overheated brakes or clutch, which could ultimately cause brake failure.

5. Leaking Brake Fluid

Fluid leaking from the master cylinder or anywhere else in the brake system may result in a soft brake pedal.

6. Vibration or Wobbling while Braking

An uneven rotor may result in the driver experiencing wobbling or vibrations while driving. The rotors should be checked to be smooth and have optimum thickness for safe braking.

It is highly recommended that the brakes of any vehicle should be regularly inspected to experience 100% brake system effectiveness.


Your trusted Brake Repair Bilston, facility should ideally:

  • Test drive
  • Visually inspect
  • Measure pads and shoe thickness
  • Check for even wear of shoes and pads
  • Check the rotors for any running out
  • Check the hardware
  • Make sure the wheel cylinders, master cylinder, and brake lines are not leaking
  • Monitor any other fluid leaks
  • Inspect the Calipers
  • Check the level of brake fluid
  • Inspect routing of the brake
  • Check the anti-lock brake sensors

The brake system should be inspected every six months to ensure the safety of the passengers. There is nothing more important than your safety and the safety of your loved ones. Hence, the vehicle should be equipped with good quality tyres and done all its Brake Repair Wolverhampton to make drives pleasurable and safe.

You could bring your car for brake repair by visiting us, at First Stop Auto Centre.

Leave a Reply

Your email address will not be published. Required fields are marked *