Why do brakes fail?

You realise the importance of brakes when you’re in dire need to stop your vehicle, and they ditch you at that last moment. God forbid, this shouldn’t ever happen with anyone. Brakes are another significant part of your car, which has a mammoth responsibility to bring your vehicle to a halt. That’s why you must keep checking these brakes from time to time.

 

To understand what causes brake repair Northampton failure, you need to first know the kind of brakes you have in your vehicle. Comprehending the modus operandi behind brakes will help you look after your brakes well. Brakes make use of friction that happens to be between two surfaces. The energy of the vehicle in motion is converted into heat. Brakes hinder the speed of any car by sucking up this energy.

Types of brakes for your vehicle

There are brakes in the front and brakes at the rear.

  • Vehicles generally have disc brakes in the front. It’s widespread to find these brakes on cars nowadays. These brakes have a disc attached to them that takes a round motion as the vehicle moves. These brakes are said to be pretty durable and help you in stopping your vehicle quickly. These brakes are resistant to water and can be adjusted automatically.
  • Another set of brakes are called the drum brakes. They are like support brakes for any vehicle and fitted at the rear wheel. They are called so because of a drum that rotates along with the wheel. These brakes are economical to use, and they can work in tow with the handbrakes.

Let’s know the reasons behind the failure of these brakes.

Reasons for the brake failure

  • Presence of lubrication

As stated earlier, brakes need friction to work. If there’s any lubrication present there, your brakes may not function well. This lubrication can be in the form of grease or oil. Sometimes, oil or other kinds of fluid can leak from the engine of the car. In such a case, get an inspection of your brakes done to avoid failure.

  • Brake pads overheating

Unwarranted use of brake pads can lead them to heat up. Over some time, they become quite hard. Due to this hardening, the pads aren’t able to grip the rotor disk. This increases the distance required to stop the car.

  • Muddy or watery surface

Just mentioned lubrication is not suitable for your brake repair Northampton pads. But driving on such surfaces lubricates the pads naturally. This creates a loss of friction and brake failure ultimately. You must keep tapping your brakes in such a condition and maintaining the friction required to let your brakes function normally.

  • An overloaded automobile

If your vehicle is overloaded, it might hinder the stopping ability of the car. Therefore, you must always check the owner’s manual before loading your vehicle.

  • Carelessness on the driver’s part

When you press brakes very frequently, you’re somewhere compromising with the longevity of the brake pads. But that doesn’t mean you don’t press the brakes. As your car owner, what we mean here is to keep inspecting your brake pads or take them to some skilled mechanic for regular check-ups.

  • Rotor discs not working to the optimum capacity

These discs play a significant role in making your brakes efficiently. Any issue with the rotor discs can affect your brakes directly. Whenever your brakes are replaced, your rotor discs should also be turned by the technician.

  • Squealing brakes

When brake pads start wearing away, they often make a squealing sound. This can disturb your rotor discs as well. Such brakes can cost you a lot of money to replace them, as it won’t be just possible to repair them.

Brakes are one of the most significant parts of your vehicle, and you must treat them well. Always use an approved brake fluid for your brakes, or else you might ruin them. Keep examining them regularly to avoid any untoward incident. For more information about Tyres Northampton.

Leave a Reply

Your email address will not be published. Required fields are marked *